Whalen BBAVC66-GB Instrucciones De Montaje página 4

①
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Locate the Back Frame (G) on a level and protective surface with the flush surface facing up.
3. Fasten the Middle Frame (E) to the Back Frame (G) with two 38 mm Bolts (1) and four Washers (4 and
5).
Assembly Instructions
4
5
2
×
1
1
5
④
2
×
4
E
4
G
⑤
2
×