Getting Started - XtremeMac INCHARGE FM Guía De Usuario

All manuals and user guides at all-guides.com

Getting Started

Step 1 - Tune your FM stereo
Locate a frequency that has only static – no talk or music. If you
can't find a frequency with only static, tune to one that has the
most amount of static and the least amount of talk or music.
Step 2 – Connect InCharge FM to your iPod
Make sure the USB end of the cable is plugged tightly into the car
charger base. Then plug the car charger into your car's 12V
accessory/cigarette lighter outlet. A blue power indicator will
illuminate on the base indicating a proper connection. Next,
attach the dock connector to your iPhone or iPod.
Step 3 – Tune InCharge FM
Once you connect InCharge FM to your iPod, the unit will activate
and display a digital FM frequency. Use the buttons on the face of
the unit to tune to the same frequency as the one on your FM
stereo. The bottom button tunes down the frequency and the top
button tunes up the frequency. Once the frequency on InCharge
FM matches the one on your car stereo, press play on your iPhone
or iPod and the unit will begin transmitting your music through
your car stereo. Please note that while driving your selected
frequency may fade or experience interference. If the signal
becomes poor or the sound quality drops you should tune to a
different frequency on your FM radio and repeat this step.
Step 4 – Programming and Using Preset Stations
Your InCharge FM offers two preset options for the FM
frequencies that you use most often. To set, tune InCharge FM to
the frequency you wish to select. Hold down either the one dot
button or two dot button on the side of the unit until the
displayed frequency begins to blink and then release. Repeat for
your second preset option. When finished, simply press the
button for the preset you would like to use.
6 | InCharge FM User's Guide