Usage Of The Operator Devices; Operating The Converter; Turning The Converter Off; Cleaning - Ranpak Geami WrapPak HV Manual Del Usuario

Geami WrapPak HV
9.
Press the foot switch until the paper comes through the
front rollers.
10.
Turn the speed control to the required speed.
3.4

Usage of the Operator Devices

1 2
Operation / Function Keys:
1.
2.
3.
a
b
4.
Geami WrapPak HV Operator Manual - EN
®
3
Speed control
- Turn clockwise = faster
- Turn counter clockwise
= slower
Main switch
- Set the main switch to
"On"
Inlets
a Cable foot switch
b Power cable
+ on/off switch
Foot switch
- Press to feed paper
3.5

Operating the converter

After completing all required actions as stipulated in section
3.2 "Turning the Converter On" the Geami WrapPak material
can be produced:
• Turn the speed control to the required speed.
• Press the foot switch to initiate a feed;
• While feeding the paper pull the paper tight and
simultaneously wrap your product on the packstation.
• Release the foot switch as soon as the desired length is
reached.
•
Pull the paper tight and tilt the wrapped product so that
the die-cut paper together with the interleaf can be torn
using a flat hand.
3.6

Turning the Converter Off

After use, the converter can be turned off by setting the main
switch to the "Off" or "0" position.
3.7

Cleaning

Any personnel can clean the exterior of the converter.
Prior to cleaning, remove the power plug from the wall socket.
The converter can be cleaned with:
• A damp cloth
• Vacuum-cleaner.
The converter must not be cleaned with:
• Detergents
• Excessive amounts of water.
If the converter is cleaned by someone other than the
operator of the converter (e.g. a cleaning department or
external cleaning company), these persons must have the
correct instructions to safely carry out the cleaning activities
EN
4