Premier SCR-4637USID Manual De Instrucciones página 24

tuning will be activated. It will resume to auto tuning automatically. To store the station, press and
hold any 1-6 number button.
MP3 Control
1. This unit can read the files which found in USB/SD/MMC card by plugging it into the slots.
2. When it is playing the tracks from USB, USB icon is found on the display.
3. When it is playing the tracks from SD/MMC card, SD icon is found on the display.
4. When the file type is MP3; then MP3 icon is found on the display.
5. When the file type is WMA; then WMA icon is found on the display.
6. Press fast forward to go to next track and press rewind backward to rewind to the previous track.
7. When MP3 is playing, press "1" number button to pause it and to resume it by pressing "1" again.
8. Press "2" number button to listen to the first 10 seconds of each song. Press again to cancel.
9. Press "3" number button to start or cancel the repeat function.
The cycle is:
The factory default is repeat all tracks. Then press "3" number button to repeat single track only.
Press again to cancel single track repeat.
10. Press "4" number button to play all the MP3 files randomly. Press again to cancel.
11. Press "5" number button to play the previous 10 tracks.
12. Press "6" number button to play the next tracks.
ID3 TAG
1. If The MP3/WMA file is available with ID3 TAG. The following information will be shown on LCD
display automatically.
~ Song name with file type
~ Title
~ Artist
~ Directory
Or you may have a quick scan about track information which you are playing by pressing BND
button.
2. During MP3/WMA mode, press AMS/S button on the unit or APS button on remote control to
activate the track search mode, with below methods:
~ Press the number button (either from the unit or the remote) or rotate the rotary knob to select
the desired track. For example, you are now playing the first song and you want to swift to track
59, press AMS/S or APS button, "TRK SCH" will be found on the LCD display, Then rotate the
rotary knob to select from the number "0","1","2","3","4","5","6","7","8","9" to select "5" or press "5"
on the unit or remote; so that the first digit "5" will be found on LCD Display. Then wait for 3
seconds, it will move to the second digit automatically; then again rotate the rotary knob or press
number knob on remote; so that the second digit "9" will be found on the LCD Display.
To confirm your selection, press "SEL" button.
~ You may always cancel your track selection by pressing AMS/S button on the unit or APS
button on remote.
P-5