Steren MOV-123 Manual De Instrucciones página 16

2
Wait until the green indicator (START) flashes.
This indicates that the starter is ready to be
used.
If the red indicator (ERR) lights up, check the
connection, cable status and starter charge.
3
Disconnect the positive terminal of the battery, and connect the
positive alligator clip (red). At the negative terminal of the battery,
connect the negative alligator clip (black).
4
Try to start your car.
If after 3 attempts it is not possible to start the
car, press the multifunction button for 3
seconds, and wait until the START indicator
lights up again, then try again.
5
When your vehicle starts, disconnect the starter immediately.
5