Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
When the diameter of roll is <10mm, follow the step 3 and 4 to change a new roll
3.
Remove the remaining roll from the paper holder wheels
4.
Pull the remaining roll between the roll holders. Then follow Step 1 and 2 to install a new roll of
paper towel.
LENGTH REGULATION
Dispense length
200 mm (7 7/8 ") - S
250 mm (9 7/8 ") - M
300 mm (11 7/8 ") - L
Notes:
1. The indicator keeps on lighting when the sensor has been covered by paper or not transparent things.
This should be removed.
2. When the batteries power is in different condition, the length of paper towel dispensed will be a little
bit different.
APPLICATION
1.
Alter finish the installation, switch on the power, and the auto paper towel dispenser will work.
2.
The dispenser will dispense paper towel automatically when hands are placed 8 ± 1 cm closer to
the sensor. When remove the hands, the dispenser will stop working. There is 1 second interval alter
a dispensation.
3.
Toss the paper towel from left or right according the symbol on the casing.
Indicator
Length regulation
Switch
Switch on the power, use the "Length Regulation"
button to adjust, there are 3 kinds of length can be
choose. Every time press the button, shows different
length in different ways. As follows:
State of indicator
Flash one time
Flash two times continuously
Flash three times continuously
Publicidad
Tabla de contenido
