Enzo EMAF3219KE Manual Del Usuario página 8

OFF several times. This indicates that the heating element is turning ON and
OFF to maintain the set temperature.
• During the cooking process some excess oil from the ingredients will be
collected on the bottom of the Pan (D).
10. Some ingredients require shaking halfway through the preparation time to help cook
evenly (see section 'Settings'). To shake the ingredients, gently pull the Pan (D) out
of the appliance by the Handle (C) and gently shake the Pan (D) from side to side to
reposition the ingredients. After shaking slide the Pan (D) back into the air fryer and
cooking will start again.
Tip: If you set the timer to half the preparation time, you will hear the timer bell
when you have to shake the ingredients. However, this means that you have to
set the timer again for the remaining preparation time after shaking.
11. When the set cooking time has elapsed you will hear the timer bell, and the Air Fryer
will automatically turn OFF. Using the Handle (C), gently pull the Pan (D) out of the
appliance and place the Pan (D) on a heat-resistant surface.
Note: You can also turn the Air Fryer OFF manually. To do this, turn the Timer
Control Knob (G) to 0.
12. Check if the food is cooked to your desired level. If the food is not ready yet, simply
slide the Pan (D) back into the appliance and set the Timer Control Knob (G) to a
few extra minutes.
13. Use a pair of tongs or a spoon to remove the cooked food from the Pan (D).
Note: Do not turn the pan upside down to remove the cooked food, as any
excess oil that has collected on the bottom of the pan will pour out.
After hot air frying, the pan and the ingredients are hot. Depending on the type
of ingredients in the air fryer, steam may escape from the pan.
After the first batch of food has completed cooking, the Air Fryer is instantly ready for
preparing another batch because it is already heated. To cook another batch simply repeat
steps 5-13.
~ 8 ~