Bluetooth Connection; Remote Control - LOTRONIC LTC Audio MFA1200USB-BT Manual De Instrucciones

Plug the mains lead in and switch the amplifier on once you have checked all connections.
Switch the audio sources on and adjust the master volume to the required level.
Karaoke: Plug a mic into MIC1 or MIC2 socket on the front panel. Before you use the mic, make sure that it is
switched off and the MIC volume button is set to the minimum. Connect the microphone, switch it on and adjust
slowly the volume and the echo.
If you don't use the unit any longer, switch the amplifier off and disconnect it from the mains.
Signal Sources and their Connections:
• Connect a DVD-player or a CD-player to the terminal AUDIO INPUT or a data storage unit to the USB-interface
or insert a SD-memory card in the suitable slot or activate the Bluetooth function on your smartphone.
• Select the active signal source by pressing the INPUT button until the desired input source is displayed.
• Use the MP3 CONTROL-function for controlling the files on a connected data storage unit.
• If you wish to use the karaoke function of this device, insert one or two microphones into MIC1 and MIC2. Their
signals are going to the signal output too.

Bluetooth Connection

The MFA1200USB-BT is only discoverable when the input selected is Bluetooth. After selecting Bluetooth input
mode on the MFA1200USB-BT, turn on the Bluetooth function on the cell phone and search the MFA1200USB-BT.
Its Bluetooth device name is "MFA1200USB-BT". Pair and connect after search. There is no pairing code.
Rear Panel:
Power supply: Connect the unit to the AC power outlet.
DC power input: Connect this input to a DC adaptor to power the unit.
Speakers Outputs: Connect your speakers here to receive the signal from the MFA1200USB-BT.
DVD Input: Connect your DVD or CD or any other passive signal here.

REMOTE CONTROL:

Play/Pause: Press this button to play or pause the playing.
Previous/Next: Press either of these buttons to go to the previous or next track
Volume: Press either of these buttons to adjust the master volume.
EQ: Press this button to switch among all the EQ modes
Number keys: Press these keys to enter numbers
PICK SONG: After entering number, press this button to go to that track immediately.
CH SET: Press this button to switch among all the Inputs.
©LOTRONIC 2016 MFA1200USB-BT 3