Home Accents Holiday 384 406 Guia De Inicio Rapido

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
READ AND FOLLOW ALL
a.
SAFETY INSTRUCTIONS.
b. This product is for indoor use only. The electrical rating is 1.70A 120V
60Hz.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place
on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that is not a
part of the product when in use.
m.Read and follow all instructions that are on the product or provided
with the product.
SAVE THESE INSTRUCTIONS
n.
(IMPORTANT: If your tree came with the SUREBRIGHT™ lights. Do not
remove bulbs with the white ring base. These bulbs are safety fused bulbs
and removing them will permanently damage the light string and void
the limited warranty of this product. )
Pre-Assembly
Package Contents
Part Description
A Tree top, tag 1
B Tree center, tag 2
C Tree bottom, tag 3
D Tree stand
Assembly
Assembling the tree stand
Step 1.Choose a location near a wall outlet.
Step 2.Unfold the legs of the tree stand (D) and lay the stand on the floor.
Step 3.Slide the locking disk of the tree stand (D) down until it snaps into
place.
Assembling the tree
Step 1.Remove the protective caps from the tree bottom (C) and insert
the pole into the tree stand (D).
Step 2.Remove the protective caps from the tree center (B) and insert the
pole into the tree bottom (C) .
Step 3.Remove the protective cap from the tree top (A) and insert the
pole into the tree center (B).
Step 4.Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all wires
are free of branch hinges.
Step 5.Connect the light strings as per the color labels indicated in
attached photo and insert green label plug into the wall outlet.
Quantity
1
1
1
1
Section 1
S100
Section 2
S100
Section 3
S100
Step 6.When finished shaping the branches, slightly upsweep all branch
tips for a uniform look.
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose plugs
and/or broken, loose, or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and
life expectancy of your tree.
Step 1.Connect the light strings of the tree together and plug the power
cord into a wall outlet.
Step 2.If the tree comes with a foot pedal, step on the On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers, bulbs, and fuses for any
replacement or repair that you need to perform on your tree. If extra parts
are needed, contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST, Monday through Friday.
Repairing Loose Hinges
Step 1.Place the branch into the slot of the bracket
Step 2.Insert a new hinge pin through the holes of the bracket and secure
with a washer.
Care and Cleaning
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug each section of the
tree.
Step 3.Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4.Repeat this step for the center and bottom tree sections.
Step 5.Carefully place all tree sections into a shipping box and tape it
shut.
Step 6.Store your tree in a cool, dry place away from sunlight.
Troubleshooting
Problem Solution
The tree does not Ensure that all tree sections are plugged into
light each other and that the tree is plugged into
the wall. If your tree came with a foot pedal,
step on the On/Off button.
Check for blown fuses at the light string and
power cord plugs. Replace as needed with the
replacement fuses provided.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided
Christmas Tree
Sku # 384 406
S50
S100
Assemble
Red Labels
Together
Assemble
Yellow Labels
Together
S50
Green Label
Plug Into Wall
Insert
Outlet