Power Supply; How To Use - Steren BAF-700 Manual De Instrucciones

POWER SUPPLY

You can use an AC power adapter to power
the speakers.
1.- Plug the adapter into the 12V DC
speaker's connector.
2.- Plug the adapter into an AC outlet.
INSTALLATION
1.- Plug the cable from the speaker #2 into
OUT jack, located in the fi rst speaker.
2.- Then, plug a 3.5mm / RCA cable to your
audio device (MP3, computer, CD player,
etc.). If you use a RCA cable, remember to
match the colors from the cables with the
jacks, in both devices. Usually, the 3,5mm
cable should be connected to earphones
output jack of the portable device.

HOW TO USE

Follow these simple steps to use the
speakers:
1.- Turn the speakers on, press Power
button to do it.
2.- Set the volume level to the minimum,
later you can set it in according to your
needs.
3.- Turn the audio device on (MP3 player,
computer, CD player, etc.)
4.- Playback a song and raise the volume
level in the speakers.
5.- You will listen to the music in the
speakers.
6.- To turn the speakers off, just press
Power button once.
5 5 5 5