Air Quality Indicator - TaoTronics TT-AP002 Guia Del Usuario

Note:
PM2.5
1. when the unit is on, the Air Quality indicator will light up to show the current
air quality:

Air Quality Indicator

Green
Air Quality Good
2. To achieve better purif ication, make sure to
keep the purifier 30 centimeters / 11.8 inches
away from walls, furniture and so on and at
least 50 centimeters / 19.7 inches away from
metals / electrical appliances.
3. In sleep mode, press the Sleep Button once to
check the current settings. Press twice to turn
off the sleep mode.
4. In automatic wind mode, the unit will adjust
the fan speed according to the results read by
the dust sensor (dust concentration).
EN
Installing and Removing the Filter
1. Use soft brushes to dust off the f ilter regularly for better purif ication. Don't wash it with water.
2. Replace the f ilter when the Change Filter Reminder flashes:
ｖ!Unplug the power source.
ｗ Remove the rear grille.
ｘ Take out the old f ilter by pulling the tabs.
ｙ Install a new or the cleaned f ilter and put the rear grille back on.
ｚ Press and hold the ION Button for 3 seconds to reset the unit. The Change Filter Reminder
will turn off.
04
Orange Red
Moderate Unhealthy
Wall Wall
ｖ ｗ
ｘ ｙ
Filter
Turbo
High
Mid
Low
POWER FAN TIMER SLEEP
Press 3s, Auto mode Press 3s, to reset Filter
ｚ
EN
ION
05