Electrical Wirings; Parameters Description - Eopus CH-02-N Manual Del Usuario

Eopus

ELECTRICAL WIRINGS

Output 2: Time End Output/ FAN
* Extra pin
- External buzzer
21
- Extra
23
*If the system does not have protections, pin 11 must be joined with 22.
CH-02-N
NO C
6 7
+ B
-B
26

PARAMETERS DESCRIPTION

P00: Process input type selection parameter. (Default: 0)
▪
0 J type (Fe, Cu, Ni) Thermocouple <900
▪
1 PT100 Thermoresistance <900
P01: Unit selection parameter. ℃ (0) or ° F (1) can be chosen. (Default:
℃).
P02: Operation scale minimum (Low Limit) value. It changes according
to the process input type and scale. (Default: 800 binary).
P03: Operation scale maximum (High Limit) value. It changes according
to the process input type and scale.
P04: Process set value low limit parameter. It can be adjusted between
Operation Scale Minimum (P02) and Process Set Value High Limit
(P05).
P05: Process set value high limit parameter. It can be adjusted between
Process Set value Low Limit (P04) and Operation Scale Maximum (P03).
P06: Process offset value. It can be adjusted as a degree (°C or °F), from
-20% of scale to 20% of scale. It is added to the process value
P07: Output control type parameter. It can be selected ON OFF or PID
P08: Hysteresis value. It can be adjusted from 1° (point representation:
1°) to 20°
P09 Minimum ON/OFF control output time parameter. It can be adjusted
from 0 to 60 seconds
Innovation in Control
4