Timer Display - GDD LIAC7IM3 Instrucciones De Operación

WEEKLY TIMER SETTING

Timer Display

Lights up if Timer
operation is selected
TIMER
1 2 3 4 5 6
MONTUEWEDTHU FRI SAT SUN
ON
OFF
ON Timer
To automatically switch "ON" the unit
Day to be selected
Function Step
Enter timer mode
Press
Set day & time
1. Press
2. Press
3. "1" will be blinking, press
4. Press
5. Press
If you want to set the timer together with other operations, press
6. Press
• After 2 seconds, the display will move to the next program.
7. Repeat steps 4 to 7 to set programs 2 to 6.
• During timer setup, if no button is pressed within 30 seconds, or if the
Repeat the steps above.
Add/Modify timer
Disable timer
Press
Enable timer
Press
Check timer 1. Press
2. Press
3. Press
Cancel timer
1. Press
2. Press
3. Press
4. Press
5. Press
Notes:
• You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.
• ON Timer can be set together with your desired temperature and this temperature will be used continuously.
• Same timer program cannot be set in the same day.
• You may also select collective days with same timer setting.
• Promotes energy saving by allowing you to set up to 6 programs in any given day.
6 different programs can be set in a day (1 ~ 6)
Indicates the selected day
Indicates the next timer operation day
Time to be selected (10 minutes step)
OFF Timer
To automatically switch "OFF" the unit
TIMER
.
or to select your desired day.
SELECT
to confi rm
SELECT
OFF/ON
to select ON or OFF timer.
or to select your desired time.
SET
to confi rm program 1. The selected day will be highlighted with ▼.
setting at that moment is confi rmed and timer setup is ended.
CANCEL
TIMER
, then press .
SET
TIMER
, then press .
TIMER
.
or until your desired day is shown, press
or to check the set programs.
TIMER
.
or until your desired day is shown.
SELECT
to enter program setting.
or until your desired program is shown.
CANCEL
to cancel the program.
to set program 1.
SELECT
SETTING
SET
TIMER
SELECT
OFF/ON
CANCEL
CLOCK
MODE QUIET
and .
SET
button is pressed the
to confi rm your selection.
7