Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Remove reflector. (Figure 2.)
Figure 2.
3.
Disconnect ballast from branch circuit. (Figure 3.)
Please check if supply conductors are rated 90C,
otherwise supply conductors shall be routed away from
heat-producing LED drivers and LEDs by following
(step no. 9d).
Figure 3.
Installation Instructions – ILED Retrofit Kit
4.
Remove socket tracks screws. (Figure 4.)
Figure 4.
5.
Remove ballast and socket tracks including all lamp
holders and associated wiring. (Figure 5.)
Figure 5.
COOPER LIGHTING SOLUTIONS
IL519006EN
Installation instructions
3
Publicidad
