PROZIS Funky Manual Del Usuario página 7

Pairing
Pairing with smartphone
• Turn on the BT settings on your smartphone and wait until Prozis Funky appears in the list
of BT devices found.
• Select Prozis Funky and wait until the speaker is listed as connected in the BT settings of
your smartphone.
• Once paired, you can begin to play music rom your smartphone, wirelessly.
Pairing with computer or other devices
• You should use a BT adapter if your computer does not support BT connection.
• Plug the BT adapter into the computer's USB port and make sure the BT function of the
adapter is activated.
• Open the BT software installed in your computer and select "Search for BT devices" (check
the BT software user manual if needed) and wait until Prozis Funky appears in the list of BT
devices found.
• Select Prozis Funky and wait until the speaker is listed as connected in your computer's BT
settings.
• Switch on the media player to play music, watch TV or movies, or play games.
USB Charging Port
1. Connect the USB charging cable included to recharge the speaker.
AUX-in Port
2. Plug in a 3.5 mm audio cable.
Operating the speaker in AUX-in mode
If you are using an iPad, MP3/MP4 player or any other mobile phone that does not connect to
the speaker wiressly, you can use an audio cable.
• Plug one end of a 3.5 mm audio cable to the speaker or line-out jack on your player and
plug the other end of the cable to the AUX-IN jack of the speaker.
• Switch on the external audio source and play your music.
• Press the power button once to switch to AUX IN mode. The LED indicator will flash white
every 2 seconds.
• Press and hold the power button to switch off the speaker when you're finished listening.
EN
7