Technical Characteristics - Ugin DUCATRON QUATTRO Modo De Empleo

UGIN DENTAIRE

TECHNICAL CHARACTERISTICS

OVERALL DIMENSIONS
- WIDTH:
- HEIGHT:
- DEPTH:
- WEIGHT:
ELECTRIC POWER SUPPLY
- TOTAL POWER:
- ABSORBED GENERATOR POWER:
- ELECTRIC POWER VOLTAGE:
- FREQUENCY:
CHARACTERISTICS
- GENERATOR FREQUENCY:
- FUSION CAPACITY:
- MAX TEMPERATURE:
- ADJUSTABLE POWER INPUT:
- CENTRIFUGE SPEED:
- TWO TYPES OF STARTING MODE:
. "Moderate" for precious alloys (cylinders1X and 3X).
. "Rapid" for non-precious, semi-precious and precious alloys (cylinders 6X and 9X).
- MEAN FUSION TIME FOR 25g NEW ALLOY: ≤ 1 minute
- WATER LEVEL WARNING LIGHT (Cooling circuit).
- GENERATOR MALFUNCTION WARNING LIGHT.
- ON AUTOMATIC STANDBY: After 10 minutes without control buttons being touched
- CAPACITIVE TOUCH CONTROL PANEL (Light touch).
- CLOSED CIRCUIT INDUCTOR COOLING SYSTEM:
water pump, filling 20 litre minimum to 22 litre and water sensor.
- AUTOMATIC ARM RETURN TO INITIAL POSITION AT CYCLE END.
ACCESSORIES
- 5 CRUCIBLES: 2 GREY (Silicon carbide) and 3 WHITE (Silica)
- 1 VITRIFIED CARBON SLEEVE
- 1 QUARTZ BATON
- 6 CRADLES (1X-3X-6X-9X-D42-D92)
- 4 METAL CYLINDER ASSEMBLIES (1X-3X-6X-9X)
- 1 GRIPPER FORK
- 4 ADJUSTABLE FEET (for machine stability)
Rev. 080119
600 mm
980 mm
620 mm
95 Kg
2500 W
2000 W
230 V
50 Hz
130 KHz
60g precious or non-precious alloy
1500/1600°C
from 20 to 100%
450 rpm
DUCATRON QUATTRO
15