Lutron GRAFIK Eye GRX-CI-PRG Instrucciones Para La Instalación página 3

A/V Connections and Signal/Link Information
GRX-CI-NWK-E, GRX-IA-CI-NWK-E, OMX-CI-NWK-E
CAT5 Cable:
maximum 328 ft
(100 m)
RJ45 jack:
Ethernet
Link
Amber LED:
Ethernet speed
( 10: off; 100: on)
Green LED:
Ethernet link (on)
Ethernet activity
(flashing)
GRX-CI-RS232, GRX-IA-CI-RS232, OMX-CI-RS232
RS232
Link
GRX-CI-PRG, GRX-IA-CI-PRG, QSE-CI-NWK-E
Links and connections are same as shown for
above units.
To PC or AV Equipment. For Ethernet Link, use CAT5 cable
to connect to auxiliary equipment. The Ethernet Link LED
will light continuously when link is present and will flash
when there is link activity. Additional Ethernet network
equipment and cables provided by others.
Data Link (to
Control Units,
processors, 12–24 V
and Do not wire terminal 2 on Data Link when using
wallstations) optional transformer. To power separately
from the Data Link, order the following Lutron
transformer model numbers:
RS232 Cable:
maximum 50 ft
(15 m)
COM
To PC or AV
equipment: Use a
TxD
standard DB9 serial
RxD
cable, or follow the
chart at right.
Data Link (to
Control Units,
processors, and
wallstations)
®
DIP Switches
to outlet (with optional transformer).
120 V : T120-15DC-9-BL
240 V : TE240-15DC-9-BL
240 V (UK): TU240-15DC-9-BL
RS232 Interface
Common
Transmit
Receive
DIP Switches
LED 1: Power
LED 2: Ethernet link
LED 3: Unused
LED 4: RS232 link TX
GRAFIK Eye and GRAFIK Systems
®
1 2 3 4 5 6 7
LED 1: Power
LED 2: Ethernet link
LED 3, 4, 5: Unused
LED 6: Data link TX
LED 7: Data link RX
RS232 Pin Connect Wiring
Typical PC or Pin on
A/V equipment 9-pin cable
Com
TxD
RxD
1 2 3 4 5 6 7
LED 1: Power
LED 2, 3: Unused
LED 4: RS232 link TX
LED 5: RS232 link RX
LED 6: Data link TX
LED 7: Data link RX
1 2 3 4 5 6 7
LED 5: RS232 link RX
LED 6: Data link TX
LED 7: Data link RX
Installation Instructions
TM
5
3
2
3