AR SPQ820 Guia De Inicio Rapido página 4

Bluetooth wireless connection tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there's nothing plugged into the speaker's AUX IN jack when you're trying to use
Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This
range may vary, however, based on other factors, such as room layout, wall material, obstacles,
your device's Bluetooth performance, etc. If you're having problems connecting to the speaker,
move closer to it.
• If your device asks you for a password to connect, use "0000".
If you're having trouble reconnecting, try the following solutions:
• Find the device named ARQ820 in the Bluetooth menu on your phone, and remove (or forget)
this device. Then start the pairing process described in this section again to re-pair and connect.
• With the speaker off, press and hold the
audio signal and turns on. This resets the speaker. Then, remove "ARQ820" from your phone's
Bluetooth devices and repeat the pairing process.
5. Start playing music on your device
Set your device's volume for music to 50%. Start playing music
or other audio on your device. Within seconds, the speaker starts
streaming the audio wirelessly via Bluetooth.
To adjust the volume of your audio: Use the volume controls on
your phone.
TIP: If you're playing music via Bluetooth, a quick single-press on the speaker's
will pause/play.
4
button for 10 seconds until the speaker gives an
button