Installation; Preparing For Installation; Installing The Cabinet - Glacier bay PPMDSJVM30MS Guía De Uso Y Cuidado

Installation

1

Preparing for installation

□ Determine the desired mounting location, and mark the
wall where the vanity cabinet (B) will be installed.
NOTE: For secure installation, the unit must be
mounted to at least one wall stud.
2
Positioning the cabinet
□ Move the vanity cabinet (B) into place, and use wood
shims to level the vanity cabinet (B) against the wall.
3

Installing the cabinet

NOTE: The mounting hardware is not included and
must be purchased separately.
□ For wall stud installation, insert #12 x 3 in. screws with
washers into the stud locations.
□ For drywall installation, drill holes at the appropriate
locations and insert toggle bolts with washers.
□ For concrete wall installation, drill 1/4 in. holes at the
appropriate locations and insert #12 wall anchors,
followed by #12 x 3 in. screws.
B
5
Please contact 1-888-774-8062 for further assistance.
B
HOMEDEPOT.COM