Before using your new Electronic insect killer, please read
Before using your new Digital Tire Pressure Gauge, please
this instruction manual to prevent any damage. Put it away
read this instruction manual to prevent any damage. Put
in a safe place for future references.
them away in a safe place for future references.
Use your new Digital Tire Pressure Gauge to keep tires properly inflated
and your car running at its best. Tire with low or uneven pressure can
under-perform, wear unevenly and become prone to mishaps.
This pressure gauge measures from 0 to 100 PSI, accurate to within
+1.5%.
The handle has been specially designed to be comfortable and easy to
use.
IMPORTANT
Clean only with a soft, dry cloth.
Do not try to open the equipment, may cause malfunction and warranty
repeal.
Do not use or store the equipment near wet places. May cause
malfunction.
HOW TO USE
1.- Check your tire's specifications in order to know the required pressure
level.
2.- Press and hold for two seconds the ON button. The LCD screen will
turn on and after a second, you can start to measure tires air (Fig. 1).
3.- Choose a measure unit:
PSI= (Pound-force per square inch)
BAR= (100 000 pascals= 100 kPa = 1 000 000 dynes/square centimetre)
kg/cm2= (kilograms per square centimetre)
kPa= (kilopascal (kPa) = 1000 Pa = 10 hPa)
To switch between different measure units, press ON button until the
desired measure unit appears on the screen.
4.- Place the gauge's nozzle onto the tire valve (Fig. 2).
5.- Press firmly to avoid the air escapes.
6.- Wait for two or three seconds. The tire pressure appears on the LCD
screen. The measure keeps in screen for twenty seconds
approximately.
7.- Repeat the process for the next tires.
Fig.1
Notes:
The equipment will auto-off after
20 seconds.
If you want to turn the equipment
off, manually, press ON button for
5 seconds.You may continue
using the tire gauge even though
the previous reading is still
displayed.
If you observe an unusual low
reading, make sure that doesn't
exist any air leak during
measuring or that you removed
the equipment before the
measure reading appears on the LCD
screen. We recommend to realize
the measure when the tires has been used in maximum distance of 2km. If
the tire pressure is too high, slowly release air just pressing on the tire
valve with the edge of the tire gauge.
SPECIFICATIONS
Input: 3V- - -
Dimensions: 1.3 x 5.7 x 0.8in
Weight: 43g
Before using your new Electronic insect killer, please read
Product design and specifications are subject to change
this instruction manual to prevent any damage. Put it away
without previous notice.
Product: Digital tire pressure gauge
Part number: AUT-030
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center. Call Center
01 800 500 9000
Fig.2