Demo Mode - Hisense HRT180N6ABD Guía De Uso Y Cuidado

Controlling the Temperature
We recommend that when you start your
refrigerator for the first time, the temperature for
the refrigerator is set to "3" and the freezer is set to
the middle position. If you want to change the
temperature, follow the instructions below.
Caution!
When you set a temperature, you set an
average temperature for the whole refrigerator
cabinet. Temperatures inside each
compartment may vary from the temperature
displayed on the panel, depending on how
much food you store and where you place
them. Ambient temperature may also affect
the actual temperature inside the appliance.
1. Fridge
TEMP. CONTROL
2
eoco1,.,.
4
You can press the "�,! ; ;';., , . " button to
select a temperature setting. When you
press the button continuously, the
temperature will be set in the following
sequence.
C
4 - 5
3-2-1�
Important!
High ambient temperatures (e.g. on hot
summer days) and a colder setting on the
temperature regulator can cause the
compressor to run continuously or even
non-stop!
We do not advise the user set the
temperature at "5"or "l "in normal.
11
,

Demo mode

Demo mode is for store display, and it
prevents the refrigerator from generating
cool air. In this of Cooling Off Mode, the
refrigerator may seem like it is working but
it will not make cool air. Press the",,,,�;;,""' "
button for 3 seconds, and the refrigerator
will be set into demo mode. Then all of the
figures on the control panel will lighten. To
cancel this mode, press "
seconds and the refrigerator begins
cooling again.
2. Freezer
....
COLD----=---
FREEZER TEMP. CONTROL
When using the refrigerator in normal
conditions, please set the temperature
regulator at the middle position.
Important!
We do not advise the user set the
temperature control knob at " COLDER "
for too long. Doing so the temperature
drops fastest in the freezer, and the
temperature in refrigerator will rise. If there
is food in the refrigerator, don't keep it in
this mode for too long.
If the user set the temperature controller
at "COLD" position, the temperature in
the freezer is higher than that in normal
mode. This mode is only recommended
when there is no food in the freezer.
Important!
Don't place too much food directly
against the air outlet of the temperature
sensor part in the air channel cover of the
refrigerator compartment, as it will affect
the proper operation of the appliance.
,,! ; ;, •• " for 3
,,
■
COLDER
1 - - �
�
,-------,