Steren RM-100 Manual De Instrucciones página 20

B. Semi manual code search
2. In the RM-100, press at the same time SET buttons and
the corresponding to the device that you want to control: TV,
VCR, CBL SAT, DVD, PVR, CD, AUD, or MS (My system).
For example, to program the control with your TV, hold down
SET+TV.
PRESS&HOLD
Set
GUIDEI NFO
4. Point the remote control in the direction to the device and
press the POWER button repeatedly to turn off the device.
Once the device is off, press the key of the programmed
device to complete the process (the LED goes off).
ENTER
Check if the control buttons are working properly with your
device.
PVR
MENU
5. Once the devices are confi gured on the remote control, you must select the desired mode:
TV, VCR, etc. and operate the RM-100 normally.
SLP
8 8
3. Release the buttons. To make sure that you entered the
programming mode, check that the LED indicator is lit.
POWER
Press the set button. The indicator will start fl ashing.
MY SYSTEM
MS
TV/AV
1. Manually turn on the device to be programmed
(TV, VCR, etc.). Point the control at the receiver
of your device.
4. PROGRAMMING
PRESS&HOLD
Set
POWER
MY SYSTEM
MS
GUIDEI NFO
ENTER TV/AV
PVR
MENU
PRESS&HOLD
SLP
Set
POWER
MY SYSTEM
PIP
MS
LIVE TV
EXIT
GUIDEI NFO
REC