Publicidad
16
Revolution XT
Technical Specifications
REVOLUTION XT 6
REVOLUTION XT 6F
Performance
Recommended amplifier power
25 - 120
25 - 150
(watt RMS)
Continuous power handling
60
75
(watt RMS)
Peak power handling (watt)
240
300
Sensitivity (2.83 volt @ 1 m)
89 dB
90 dB
Nominal impedance (ohm)
8
8
Frequency response (-6 dB)
46 Hz - 32 kHz
38 Hz - 32 kHz
Drive Units
25 mm (1") Linear PEI dome
25 mm (1") Linear PEI dome
Dual Concentric high frequency
with Torus Ogive WaveGuide
with Torus Ogive WaveGuide
and Omnimagnet technology
and Omnimagnet technology
150 mm (6") multi-fibre paper
150 mm (6") multi-fibre paper
Dual Concentric low frequency
44 mm (1.75") voice coil
44 mm (1.75") voice coil
150 mm (6") multi-fibre paper
pulp cone with rubber surround.
Bass driver
—
44 mm (1.75") edge wound
voice coil
Crossover
Crossover frequency
1.8 kHz
250 Hz & 1.8 kHz
Passive low loss 2nd order
Passive low loss 2nd order
Crossover type
low pass, 1st order high pass
low pass, 1st order high pass
Construction
Downward ported twin
Enclosure type
Downward ported reflex
cavity coupled reflex
Volume
10.8 l (0.38 cu. ft.)
30.7 l (1.08 cu. ft.)
Dimensions (H x W x D)
400.5 x 221 x 302 mm
1005 x 269 x 317 mm
(incl. plinth)
(15.8 x 8.7 x 11.9")
(39.6 x 10.6 x 12.5")
Net weight
8 kg (17.6 lbs)
17 kg (37.5 lbs)
Finish
Dark Walnut Medium Oak
Dark Walnut Medium Oak
REVOLUTION XT 8F
REVOLUTION XT Mini
REVOLUTION XT C
25 - 200
25 - 100
25 - 120
100
50
60
400
200
240
91 dB
88 dB
89 dB
8
8
8
34 Hz - 32 kHz
68 Hz - 52 kHz
62 Hz - 52 kHz
25 mm (1") Linear PEI dome
20 mm (0.79") Linear PEI dome
20 mm (0.79") Linear PEI dome
with Torus Ogive WaveGuide
with Torus Ogive WaveGuide
with Torus Ogive WaveGuide
and Omnimagnet technology
and Omnimagnet technology
and Omnimagnet technology
200 mm (8") multi-fibre paper
100 mm (4") multi-fibre paper
100 mm (4") multi-fibre paper
44 mm (1.75") voice coil
32 mm (1.26") voice coil
32 mm (1.26") voice coil
200 mm (8") multi-fibre paper
2 x 100 mm (4") multi-fibre
pulp cone with rubber surround.
paperpulp cone with rubber
—
44 mm (1.75") edge wound
surround.35 mm (1.38") edge
voice coil
wound voice coil
250 Hz & 1.8 kHz
2.8 kHz
2.8 kHz
Passive low loss 2nd order
Passive low loss 2nd order
Passive low loss 2nd order
low pass, 1st order high pass
low pass, 1st order high pass
low pass, 1st order high pass
Downward ported twin
Rear ported reflex
Rear ported reflex
cavity coupled reflex
48.8 l (1.72 cu. ft.)
3.4 l (0.12 cu. ft.)
7.6 l (0.27 cu. ft.)
1080 x 317 x 345 mm
272.2 x 152 x 199.3 mm
176.9 x 450 x 205.6 mm
(42.5 x 12.5 x 13.6")
(10.7 x 6.0 x 7.8")
(7.0 x 17.7 x 8.2")
21.7 kg (47.8 lbs)
3.5 kg (7.7 lbs)
8 kg (17.6 lbs)
Dark Walnut Medium Oak
Dark Walnut Medium Oak
Dark Walnut Medium Oak
Other important information
Important information
1. Register online. Please register your new
MUSIC Group equipment right after you purchase it by
visiting tannoy.com. Registering your purchase using our
simple online form helps us to process your repair claims
more quickly and effi ciently. Also, read the terms and
conditions of our warranty, if applicable.
2. Malfunction. Should your MUSIC Group
Authorized Reseller not be located in your vicinity,
you may contact the MUSIC Group Authorized Fulfi ller for
your country listed under "Support" at tannoy.com. Should
your country not be listed, please check if your problem
can be dealt with by our "Online Support" which may also
be found under "Support" at tannoy.com. Alternatively,
please submit an online warranty claim at behringer.com
BEFORE returning the product.
3. Power Connections. Before plugging the
unit into a power socket, please make sure you are using
the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same type
and rating without exception.
Quick Start Guide
17
Publicidad
