NIXON THE DUO Manual De Operación página 11

7
PUSHER A
(ADJUST SECONDS)
CROWN
(PRESS AND HOLD
TO ENTER
SETTING STATE)
(ADJUST HANDS)
(EXIT SETTING
STATE)
7
RESETTING THE HANDS
If the hands on the analog display are not aligning with the
time on the digital display, they can be recalibrated.
To RESET THE HANDS, from any mode:
-Press and hold the CROWN in for 3 seconds. The hands
will attempt to point at 12 o'clock and the digital display
will read SYnCH. If the hands do not all point straight up,
they need to be calibrated.
-Press PUSHER A to advance the seconds hand and turn
the crown either direction to adjust the minutes hand until
all hands are aligned.
-Press the crown again to exit hand resetting mode.
Note: Do not push the pushers or leave the crown out
when exposing the watch to water.
LOW BATTERY INDICATOR
When the battery is running low, the watch will stop
working and the digital display will show bAtt. This means
it's time to send your watch to NIXON for a new battery.
Visit nixon.com/support for instructions on getting your
watch fixed and back on your wrist.
IMPORTANT
Please refer to the watch case back for your watch's water
resistance rating, or our website: www.nixon.com