Bluetooth Pairing - Scosche BTFREQ PRO Manual Del Usuario

POWER UP &
Follow these steps to power up and pair your BTFREQ PRO to your mobile device.
1. Plug the BTFREQ PRO into your car's 12V power socket.
2. Enter the 8/uetooth settings in your mobile
device and enable the 8/uetooth function.
3. Your phone
will confirm
once it is
connected.
CONNECTING TO YOUR CAR'S STEREO
The BTFREQ PRO has a small FM radio transmitter
that can broadcast to your car's stereo.
1. Find a weak station on your FM radio tnhat
has no active broadcast signal.
2. Press the "CH" button (A),
then turn the tuning lever up
or down (B) to tune the
BTFREQ PRO to match the
frequency of your FM radio (C).
3. If you experience interference you may
have entered an area where there is an active
broadcast signal on the station you are tuned to.
Repeat the above steps to find a different clear station.
Note: Press "CH" button to change frequencies
on BTFREQ PRO (A).
BLUETOOTH
0'.; � � :::
�
�
-
.......,
OPTIONAL AUX OUT CONNECTION
NON-BLUETOOTH
FOR
Mobile devices without 8/uetooth can be
connected to the BTFREQ PRO through the
AUX OUT port using included 3.5mm audio
cable.
PAIRING
C
DEVICES