Battery Charge; English - Konrow K-TAB 1003 Guía De Usuario

1. SIM card insertion
• Turn off the tablet and open the cover of the SIM card slot. Insert the SIM card correctly in
the space provided for this purpose (see diagram opposite). Respect the insertion direction of
the card.
• Then replace the SIM cover.
2. MicroSD card insertion
• Turn off the tablet and open the cover of the Micro SD card slot.
• Insert the memory card into the slot provided. Respect the insertion direction of the card.
• Then put the Micro SD cover back in place.

3. Battery charge

Battery charge:
• To charge the battery, connect the USB cable (supplied) to the USB port of your tablet and
the other end to the AC adapter (supplied). Then connect the AC adapter to a power outlet.
• The battery charging icon illuminates during charging and indicates the charging status.
• When the battery is fully charged, you can disconnect the USB cable from the device and then
from the power outlet.
IMPORTANT:
• The tablet can only be recharged via its USB port.
• The battery must be charged for at least 5 to 7 hours
during the first charge.
Note: Note: You can use the device while it is charging. It
is possible that the full charge time of the battery is longer.
Precautions to be observed for the charging of the
battery:
12

English