Corvette A/C Add-On Accessory Drive Package Specifications
Thank you for choosing Chevrolet Performance as your high performance source. Chevrolet Performance is committed to providing
proven, innovative performance technology that is truly.... more than just power. Chevrolet Performance parts are engineered, devel-
oped and tested to exceed your expectations for fit and function. Please refer to our catalog for the Chevrolet Performance Authorized
Center nearest you or visit our website at www.chevroletperformance.com.
This publication provides general information on the installation of a Chevrolet Performance accessory drive package (Corvette A/C
Add-On package). Please read this entire publication before starting work. Also, please verify that all of the components listed below
are in fact included in the kit.
The information below is divided into the following sections: package contents, installation instructions.
The Corvette A/C Add-On package incorporates modern technology in a package that can be installed on most Chevrolet Performance
small block Generation 3-4 engines. The Corvette A/C Add-On package includes all the necessary brackets and hardware, pulleys,
tensioner, A/C compressor and belt.
This package is designed to provide you a complete Corvette A/C add-on accessory drive package. This kit is based on the accessory
drive system from late model Corvette. It uses factory engineered brackets and components to ensure high quality as well as the fac-
tory belt tensioner to maintain proper belt tension during operation.
These specifications are intended as a supplement to factory service manuals. It is not the intent of these specifications to replace the
comprehensive and detailed service practices explained in the factory service manuals.
Observe all safety precautions and warnings in the service manuals when installing this package in any vehicle. Wear eye protection
and appropriate protective clothing. Support the vehicle securely with jack stands when working under or around it. Use only the proper
tools. Exercise extreme caution when working with flammable, corrosive, and hazardous liquids and materials. Some procedures
require special equipment and skills. If you do not have the appropriate training, expertise, and tools to perform any part of this conver-
sion safely, this work should be done by a professional.
The information contained in this publication is presented without any warranty. All the risk for its use is entirely assumed by the user.
Specific component design, mechanical procedures, and the qualifications of individual readers are beyond the control of the publisher,
and therefore the publisher disclaims all liability incurred in connection with the use of the information provided in this publication.
Chevrolet, Chevy, the Chevrolet Bow Tie Emblem, General Motors, and GM are all registered trademarks of the General Motors
Corporation.
ITEM
PART
NUMBER
NUMBER
QUANTITY
1
12556447
2
12569286
3
11515768
4
89019337
5
15709703
6
11098341
7
12552922
8
11516360
9
12595289
10
12636225
Corvette A/C Add-On Accessory Drive Package Rev
TITLE
Package Part Number 19299069 = Air Conditioning Kit
DESCRIPTION
1
STUD-10 x 1.5X127MM - 7MM DRIVE
1
BRACKET-AIR CONDITIONING COMPRESSOR
1
BOLT-10X1.5X40MM - 15MM DRIVE
1
COMPRESSOR-AIR CONDITIONING
1
NUT-10X1.5MM - 15MM DRIVE
1
BOLT-10X1.5X110MM - 15MM DRIVE
1
BOLT-10X1.5X160MM - 15MM DRIVE
1
BOLT-10X1.5X90MM - 15MM DRIVE
1
TENSIONER-AIR CONDITIONING COMPRESSOR BELT
1
BELT-AIR CONDITIONING COMPRESSOR (1040MM - LONG)
19299071
20FE12
PART NO.
FASTENING TORQUE
10 NM
7.5 FT-LB
50 NM
37 FT-LB
50 NM
37 FT-LB
50 NM
37 FT-LB
50 NM
37 FT-LB
50 NM
37 FT-LB
25 NM
19 FT-LB
1
6
SHEET
OF