Making The Electrical Connections - Home Decorators Collection JLW1612A-3 Guía De Uso

Installation (continued)
4

Making the electrical connections

Wrap the ground wire from the fixture around the ground screw
□
(DD) on the cross bar (EE). Use a wire connector (AA) to connect
the ground wire from the fixture to the ground wire from the
outlet box.
□ Use a wire connector (AA) to connect the white wire from the
fixture to the white wire (neutral wire) from the outlet box.
□ Use a wire connector (AA) to connect the black wire from the
fixture to the black wire (live wire) from the outlet box.
□ Wrap the three wire connections with electrical tape for a more
secure connection.
□ Position the wires inside the outlet box.
6
Applying caulk
□ Once the fixture is mounted on the wall, caulk the space
between the wall and the upper 3/4 area of the wall plate (A)
to prevent water seeping into the outlet box.
□ Leave the bottom 1/4 area uncaulked for drainage
of any water which might leak into the enclosure.
5
Securing the fixture to the wall
Align the mounting screws (CC) to protrude through the holes on
□
the wall plate (A).
□ Place a washer (B) onto each of the protruding mounting screws
(CC).
□ Screw the lock nuts (C) onto the protruding mounting screws (CC).
6