A- Safety Instructions; Maintenance And Cleaning; Technical Characteristics - Extel RD-40 Manuale Di Uso E Manutenzione

A- SAFETY INSTRUCTIONS

EN
1 - OPERATING PRECAUTIONS
• Do not install in cases of extreme humidity, temperatures, corrosion risk or dust.
• Do not pull the cord to unplug the device: risk of electric shock or damage.
• Do not install near acidic chemicals, ammonia or sources of toxic gases.
• Disconnect from the mains before carrying out any maintenance.
• Do not clean with abrasive or corrosive products. Use a soft, slightly damp cloth.
• Do not allow children to play with the device: risk of injury or damage.

2 - MAINTENANCE AND CLEANING

• Always unplug the product from the mains before carrying out any maintenance.
• Never use abrasive or corrosive substances to clean the products.
• Use a soft, slightly damp cloth.
• Never use an aerosol to spray the product as this may damage the internal workings.
3 - RECYCLING
This logo denotes that devices that are no longer in use must not be disposed of as household waste. They are likely to contain hazardous
substances which are dangerous to both health and the environment. Return the equipment to your local distributor or use the recycling
collection service provided by your local council.
Pour en savoir plus :
www.quefairedemesdechets.fr
B - TECHNICAL AND LEGAL INFORMATION

1 - TECHNICAL CHARACTERISTICS

Power supply
Power
Propeller diameter
Height
Horizontal oscillation
Head tilt
Speeds
2 - MAINTENANCE - WARRANTY
• The warranty is void if parts have been dismantled. Clean the outside with a soft, dry cloth only. Before cleaning, disconnect or switch off the
product.
NOTE
• Do not use any gasoline or carboxylic acid, alcohol or similar treatment. In addition to damaging your device, the fumes are also hazardous to your
health and are explosive.
• Do not use any tool that can conduct voltage (wire brush, sharp tool, etc.) for cleaning.
If necessary, consult our technical website:
www.cfi-extel.com
0 892 350 069
Latest version of the downloadable instructions
in colour on: www.cfi-extel.com
WARRANTY CONDITIONS
• This product is guaranteed for parts and labour in our workshops.
• The warranty does not cover: consumables (batteries, etc.) and damage caused by misuse, improper use, improper installation, external
intervention, damage due to physical or electrical shocks, dropping or atmospheric phenomena.
• Do not open the device as doing so will void the warranty.
• Clean with a soft cloth only, no solvents. The warranty is void if parts have been dismantled. Clean the outside with a soft dry cloth only. Before
cleaning, disconnect the equipment or switch it off at the mains.
• The receipt or invoice is proof of purchase date.
230 VAC 50 Hz
50 W
40 cm
motor spindle height can be adjusted from 82 cm to 100 cm
90° (can be disengaged)
can be adjusted up to 20°
3
Service 0,35 € / min
+ prix appel
Easymate by Extel - RD-40
EN - This symbol indicates that the device must only be installed and used indoors
3