Publicidad
Idiomas disponibles
Idiomas disponibles
Installation on a mother board:
• Unplug your computer and take the battery off.
• Press the power button and hold it pressed to discharge your device.
• Take the back panel off your laptop. (Please refer to your computer's manual).
• Find the M.2 socket on the motherboard. (Please refer to the manual of your
motherboard).
• Position the SDD M.2, so that the notches on the SDD align with the corresponding
protrusions in the socket.
• Insert the SSD M.2 into the M.2 plug with a 45° angle without forcing.
• Once the SSD is completely inserted into the socket, slightly press onto it to place it
properly. Check that the SSD is parallel to the plug, then fix it with a screw.
• Once the SSD M.2 properly fixed, close the computer and plug it to the power cable.
• Switch your computer on.
• If you did not transfer your data from an existing drive, install your OS, the pilots,
system utilities and programs needed.
• The installation is now finished.
Picture no contractual
Should there be a problem with this device, please contact FOX SPIRIT's After-Sales
department:
support@fox-spirit.com
Publicidad
