Installation; Operation - Protemp PT-36-BDF-A Manual De Usuario E Instrucciones De Funcionamiento

Simply locate fan in safe, desired position on level ground, fold out wheels, and connect to approved power source.
NOTE: This fan uses a folding wheel design. For quick assembly, simply swing the wheels out and snap to lock
in place ( see figure 1).
figure 1: Wheel Assembly
NOTE: This fan is equipped with a 2-speed control switch.
TO START FAN:
1. Be sure the Power Switch is in the (OFF) position.
2. Connect to an approved power source.
3. Make sure area is clear from all obstructions.
4. Push Power Switch to the LOW position and allow to
operate for 10 seconds.
5. Once 10 seconds have passed, you may now push the
Power Switch to the HIGH position.
© 2015, Pinnacle Products International, Inc.

Installation

Swing out wheels

Operation

Swing UP to lock
US Patent # 7413199
TO TURN OFF FAN:
1. To turn off the fan, simply return Power Switch to the
middle (OFF) position.
For longer parts life, after 10 hours of
NOTE:
continuous operation, turn fan off for 15 minutes to
allow motor and fan belt to cool.
3
Portable Air Circulator User's Manual
NEVER LEAVE A FAN
UNATTENDED WHILE
OPERATING OR WHILE
CONNECTED TO A POWER
SOURCE