Commissioning - Klarstein Sonnendeck Manual De Instrucciones

• When in operation, evaporative coolers moisturize the ambient air. Over-
humidification of residential rooms should be avoided. Recommendation: 40-50 %
relative humidity. Excessive humidity of the air can damage the home and cause
health problems.
• The appliance may only be set up on water- and moisture-proof flooring materials
(spilling some drops of water is unavoidable when the content of the tank is
changed).
• With each and every change of tank content, completely remove residual water
from the equipment. To prevent nucleation, remove residual water from the
equipment and water tank every time after three days of use.

COMMISSIONING

1. Remove the device from the carton and place it on a stable and heat-resistant
surface.
2. Make sure that all parts and accessories included in the scope of delivery are
included in the unit.
3. Place the unit on a heat-resistant surface. Remove the rollers and the screwdriver for
the roller attachment from the unit.
Note: The rollers with brakes are intended for the two front holes and the two
rollers without brakes are intended for the two rear holes (see illustration).
4. Add water by pulling the water tank about 10 cm out of the safety rod and filling it
with water (see illustration).
EN
15