Whalen PROL-36 Manual De Instrucciones página 16

Tools required: Hex wrench (provided), Phillips screwdriver, Mallet, Power Drill, and 3/8" Drill Bit.
18. Adjust the pre-attached Floor Levelers at the bottom of console to level the unit. As shown.
19. Carefully move the console and position it at the desired location against a wall. Now, follow the
instructions printed on the plastic bag containing Tipping Restraint Hardware to mount the Tip-over
Restraint to the console and the wall.
NOTE: You must install the Tipping Restraint Hardware with the unit to prevent the
unit from tipping, causing any accidents or damage to the unit.
20. The console is now ready for use.
Assembly Instructions
16