Vii.SAfety Precautions; Viii.GUarantee And After Sales Service - koban KMH-01 Manual De Instrucciones

EN
Note: All the connection should be reliable connected with the tested object, if the
contact surface oxidation, firstly should remove the contact surface oxide.
1, wiring methods: as shown in Figure 2, special test line the color red to red, black
to black, the thicker current line connected with corresponding I +, I - terminal
screws tightly, the thinner power line inserted into the socket V +, V -, two
clamped tested on the product ends.
2, measure: complete the connection as Graph 2, turn on the power switch, choose
the testing time for testing, the instrument will automatically charging, constant
current and measuring resistance.

VII.Safety Precautions

1. Handlers should having common sense of electrical equipment or tester
2. Enter "reset" after finishing measurement, and turn off power. Attention: strictly
forbid dismantle all wires live wire
3. Enter " reset" to replacing when the tester breaking.
4. The tester must be served by professional person, prohibit make it by yourself.
5. The tester only for measurement contact resistance, prohibit measurement
inductive contact resistance.

VIII.Guarantee And After Sales Service

After service: 1 years of warranty and lifetime maintenance and supporting
technology. Please contact our company on time if the tester breakdown, so we'll
arrange the fastest disposing way.
Low resistance meter
8
KMH-01