Whittier Wood Products 441W Instrucciones Para Armar

Mesa lateral de 20/29, mesa de entrada de 29

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Assembly Instructions
441W
20" Side
Table
442W
29" Side
Table
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
445W
29" Side
Table
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any
Rev. 7/05

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Whittier Wood Products 441W

  • Página 1 Service Policy: We will replace any Table parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or 442W email) for replacement parts. Hours: Our friendly customer service staff 29"...
  • Página 2: Tools Required

    Short Aprons (B) so that the Leg Braces fit into the grooves in the Short Aprons. Attach the Short Aprons to the Leg Braces with #6 x 1/2" Undercut Type 17 Screws (F). See FIGURE 2. Page 2 – 441W, 442W & 445W...
  • Página 3 Lay a 2 Hole 90° Bracket (H) on the Top (E), centered on the inside edge of each long apron (A). Fasten to the top and apron with #6 x 1/2" Undercut Type 17 Screws (F). See FIGURE 4A. 441W, 442W & 445W – Page 3...
  • Página 4 FIG. 6 4) TO ATTACH SHELF: (For 441W measure 1½" from the bottom of each leg.) (For 442W and 445W measure 4" from bottom of each leg.) Mark the location for a #6 x 1/2" Undercut Type 17 Screw (F). The mark should be made on the same leg surface that touches the short apron, slightly off center towards inner edge of leg.
  • Página 5 Instrucciones para Armar 441W Mesa lateral Normas para obtener servicio: de 20" Reemplaza- remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, 442W correo o e-mail) para obtener piezas de repuesto.
  • Página 6: Lista De Piezas

    1. Ahora coloque los faldones cortos (B) de manera 4) PARA INSTALAR EL ESTANTE: que los soportes de las patas entren en las ranuras (Para la mesa 441W mida 1½" desde la parte infe- de los faldones cortos. Fije los faldones cortos a los rior de cada pata.) soportes de las patas con tornillo rebajado tipo 17 (Para las mesas 442W / 445W mida 4"...
  • Página 7 Instructions de Montage 441W Table latérale Politique de service : Nous remplacerons toutes de 50,80 cm les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter (20 po) directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 8: Nomenclature Des Pièces

    4) FIXATION DE L’ÉTAGÈRE : trous doit être contre le fond du dessus (E). Voir la (Pour 441W, mesurez 3,81 cm (1½ po) à partir du FIGURE 1. Placez maintenant les tabliers courts bas de chaque pied.) (B) de manière à...

Este manual también es adecuado para:

442w445w

Tabla de contenido