Installation
•
Please remove all packaging material.
•
Mount the base to the bottom of the unit using the three M6*25mm screws and the hexagon key
(included in scope of delivery).
•
Please set the unit upright.
Operation
•
Operating voltage: 220-240V~, 50-60Hz, 1500W
•
Please ensure that you have positioned the appliance correctly in accordance with the safety
instructions. Afterwards, please connect the appliance to the power supply.
•
The appliance has two switches: you can switch the LED lighting on or off with the left switch; the right
switch switches the heater on or off.
On/Off
LED lighting
•
Remote control:
The included remote control (excl. 1xCR2025 battery) controls the colours, lighting brightness
o
and type of lighting. The heater cannot be controlled by the remote control.
Lighting type „Flash":
o
▪
Lighting type „Fade":
o
▪
Lighting type „Smooth":
o
▪
Lighting type „Strobe":
o
▪
If you want to achieve continuous illumination of a colour, please select your desired colour
o
Automatic quick change of colours
Automatic change of colors; there is no color lit for a short time during a colour switch.
Automatic colour change with smooth transitions.
A mixture of "Fade" and "Smooth": At first, during color transitions, no color lights up for
a short time. Then the transition changes to a smooth transition. This cycle is repeated.
On/Off
heater
Brightness (8 levels)
LED lighting on/off
Colour selection (Red/Green/Blue/White)
Lighting type „Flash"
Lighting type „Strobe"
Lighting type „Fade"
Lighting type „Smooth"