EN
Instructions of remote control RGB Colors for bulb
Important information! Keep these instructions for future use
Remote control RGB colors
OFF
15 kinds
existing colors
768 kinds colors
gradually circularly change
(automatic)
General instructions
1. Ambient temperature: - 5 °C to 40 °C
2. The remote control distance is 5 meters.
3. This lamp is not suitable for operation in dimming circuits.
4. Indoor use only.
5. Dry premise only.
6. This lamp must be used together with provided remote controller
Details refer to the instructions on controller.
7. The lamp is for mood lighting only, it is not suitable for room illumination.
8. The weight of this lamp is higher than normal incandescent lamp,
attention should be drawn to fact that the increased weight may
reduce the mechanical stability of certain luminaire.
1
ON
5 ranks brightness
adjusting
42 kinds colors
circularly change (manual)
White color
Instructions of remote control RGB Colors for bulb
Operation
Press the button to show the button color.
Press the opposite button in the same column,the color
changes step by step in direction of the pressed button.
There are 5 colors in each column as shown
in the color panel.
Brightness up and down.
Press the left button to dim down.
Press the right button to dim up.
There are total 5 levels of brightness for each color.
Press the button to start the automatic color change mode.
Keep pressing the button to change the color manually.
The color changes gradually among 42 colors following
a pre-programmed cycle.
Service
How to change a battery
1
2
Separate collection for battery
3
4
2