Setting Up And Registering Your Connected Intelliflow - Watts IntelliFlow A2C-SC Instrucciones De Instalación

Setting Up and Registering your Connected IntelliFlow

Before beginning this procedure, ensure that there is both power and WiFi available to the
IntelliFlow unit. In the event that no WiFi is enabled, your IntelliFlow unit will still protect from
leaks as long as it is powered on. It can be registered at a later time.
Install the IntelliFlow unit in accordance with the installation instructions previously listed.
First, power the device on and wait for the blue light to start blinking. To
begin the connection process, on your device, scan for new WiFi networks
and select SSID WattsDeviceSetup-xxxxx. In order to connect to the net-
work, enter password "intelliflow".
Next, scan the QR code on the product hang tag / outlet sticker. If these
are missing or removed, visit http://10.10.0.1/ to proceed with set up.
The set up process is a 4-step procedure.
These steps must be completed sequentially.
1. Product Registration – This step registers your Connected IntelliFlow.
a. Required Information: Full name, States/Province, ZIP/Postal Code
b. Optional Information: Full address
2. Washing Machine – This step sets up your washing machine profile.
a. Select the voltage supplied to your washing machine.
b. Optionally, enter the Brand and Model Number for your washing machine.
3. Notifications – This step will enable the Connected IntelliFlow to send notifications in the
event a leak is detected.
a. Required information: Email address
b. Optional information: Mobile phone number
4. Connect – This step will connect your Connected IntelliFlow to the WiFi network of your
choosing.
a. Select the WiFi network you wish to connect to. Please ensure that the WiFi is 2.4
Ghz. IntelliFlow doesn't support 5 Ghz networks.
i. If your network does not appear, it can be entered manually by selecting "Other
Network."
ii. Enter WiFi network name.
b. Enter your WiFi network password.
Upon completion of the 4th step, your Connected IntelliFlow will send a test notification to
the email address and optional mobile phone number specified in step 3.
To reset your Connected IntelliFlow and clear all stored WiFi network and notification infor-
mation, hold down the black button on the front of the unit for 10 seconds. The above
set-up procedure can then be completed to re-register your Connected IntelliFlow.
If you do not want to connect the IntelliFlow to a WiFi network, press and hold the
black reset button for 3 seconds to disable WiFi connectivity. WiFi can be re-en-
abled by holding the reset button for 3 seconds. If the IntelliFlow has been registered
prior to disabling WiFi, the device will automatically re-connect upon re-enabling WiFi if the
registered WiFi network is active with same password.
4
IS-A2C-SC-IntelliFlow 2102
®
© 2021 Watts