Publicidad
Idiomas disponibles
Idiomas disponibles
WIRELESS HEADPHONE
TAD002920HV
POWER ON,BLUETOOTH CONNECTION
Follow the steps (Please confirm that your phone is built-in Bluetooth function)
1. Hold down the MFB for about 2 seconds, LED alternately flashes alternately red and blue after blue flashing
once, the headset prompts "Power on"
2. Activate the Bluetooth function and search for "BT-60" referring to your phone instructions
3. Manually click "BT-60" to connect. If the indicator stop flashing and prompt "connected", the connection
is successful
4. Pairing mode can just last 180 seconds. if you miss the pairing time, you need to restart the device and
operate follow the procedural steps mentioned above.
5. When turning on, the headset can automatically connect the last device that you had paired.
6. Headset will lose the connection when deviate the working range of Bluetooth. The headset will reconnect
automatically if you come back to the range in 3 minutes
7. The headset will automatically turn off, the headset has no connection or lose the connection for 10min.
Power off
Hold down the MFB for 4 seconds, the power will off
Answering incoming calls:
: Short press the MFB to answer incoming calls. Tip: Since some mobile phones
default to answer calls via their own receiver, please refer to the instructions of your phone and set on your
phone.
Ending the cll :
Press the MFB once to end the current call
Refuse incoming calls:
Press the MFB for 2 seconds when there comes a call.
Last number redial:
: Dual press the MFB to redial the last calling number.
Call switch mode:
Press the MFB for 1 seconds to switch to the phone when you are in the call, and then switch
to the headset in 1 seconds
Music playing:
1.Play/Pause: Short press the MFB
2.PREV: Long press-to select the previous song
3.
NEXT: Long press + to select the next song
4
VOL+: Short press + to increase volume;
VOL-Short press- to decrease volume.
8
Publicidad
