Configuration - Steren SHOME-125 Manual De Instrucciones

CONFIGURATION

1
After creating your account, select Crear hogar. Assign a name to
the home and select or create your areas. When finished, press
Finalizado.
Crear hogar
2
Remove the bulb from your normal socket.
3
Place the Wi-Fi socket and in this, the bulb that you previously
removed.
The Wi-Fi indicator will begin to flash; this means that the socket is in Wi-Fi configuration
standby mode. If it is not configured within 1 minute after connecting it, the indicator will turn
off.
If the Wi-Fi indicator does not flash, turn off and turn on the damper 3 times. After that, the
Wi-Fi indicator should start flashing.
4