Service + Support - AQUAJOE SJ-SHSBB3LIH Manual Del Usuario

Fig. 4
4. Using the M6x50 screw and s-type nut,
secure the hose stand in place (Fig. 5).
Fig. 5
M6x50 Screw
Operation
1. Wearing work boots or other
appropriate close-toed shoes, firmly
step down on the base and push
the primary and secondary stakes
completely into the ground (Fig. 6).
Make sure your steel garden hose stand
is secure before use.
mWARNING!
garden hose stand in soft ground or mulch.
Fig. 6
Secondary
stake
S-type
nut
Do not install your steel
Base
Primary stake
2. Connect one end of the included
FIBERJACKET
water supply (spigot), and the other end
to the rear inlet.
3. Connect your garden hose to the front
faucet (Fig. 7).
Fig. 7
Front
faucet
Garden hose

Service + Support

If your Aqua Joe
garden hose stand + hose requires service
or maintenance, please call
Snow Joe + Sun Joe
®
at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Model + Serial Numbers
When contacting the company or arranging
service from an authorized dealer, you
will need to provide the model and serial
numbers, which can be found on the decal
located on the registration card. Copy these
numbers into the space provided below.
Record the following numbers from your new product:
S J - S H S B B 3 L I H
4
lead-in hose to the
®
Rear inlet
FIBERJACKET
lead-in hose
SJ-SHSBB3LIH steel
®
customer service
®
Model #:
Serial #:
®