1.3 Technical Characteris cs
CHARACTERISTICS
Voltage
Frequency
Ra ng
Consump on
Height
Width
Depth
Net Weight
Gross Weight
Rota on
(*) Voltage will be only the one indicated on motor characteris cs label.
2. INSTALLATION and PRE OPERATION
2.1 Installa on
The High Performance Til ng Blenders were developed to be used in 110 V voltages: Upon
receiving the Blender check the voltage..
The cord has two flat pins and one round this last one is ground. It is mandatory the three
pins to be duly connected before to start the machine .
2.2 Pre Opera on
First of all check if the Blender is firm in its posi on. Check if Motor (# 01) is perfectly fi ed
on the Lock Pedal (# 02) as shown on the Picture below.
Before doing any maintenance in the machine switch it OFF and unplug it.
6
TABLE 01
UNIT
LAR-15LMB
V
110
Hz
60
CV
1
kW/h
0,73
in
41 5/8"
in
14 1/8"
in
20 5/8"
lb
42
lb
80
rpm
3500
PICTURE 01
01 - Motor
02 - Pedal Lock
IMPORTANT
27