AKO 5406 Instrucciones

FITTING INSTRUCTIONS FOR AKO LIGHTING UNITS USED IN LIFT EMERGENCY LIGHTING SYSTEMS
84
77
111
Fig. 1
Fixing screws
maximum 4mm de diameter.
26
Fig. 2
- Mounting/Connection:
To mount the unit, the glass must be separate from the
base. The base is then surface mounted by way of the
two holes shown in Fig.1.
The cable, after first being passed through the central
hole, is connected to the terminals and the glass is put in
place and securit with the fixing screw.
- Lamps:
AKO-5406: Two dial E10 of 6V 200mA.
AKO-54061: Two spherical E10 of 12V 200mA.
AKO-54062: Two dial E10 of 6V 200mA.
- Dimensions: 111x77x26mm (Fig. 2).
355406002 Rev.00
355406002 REV.00
Hoja 1 de 2