Before First Use - Hkoenig GR70 Manual De Utilización

BEFORE FIRST USE

Press the Upper Plate Release Button to remove the upper Grill Plate and then press the Lower
Plate Release Button to remove the lower Grill Plate. Clean the Grill Plates, the Drip Cups, and the
Scraper/Cleaning Tool in warm, soapy water; rinse and let dry. These parts may also be washed in
an automatic dishwasher. NEVER IMMERSE THE BASE INTO OR EXPOSE IT TO WATER.
Reinsert the upper and lower Grill Plates into their respective positions before use. See the
"Inserting/Changing Plates" subsection below for detailed instructions.
NOTE: When using the Grill Plates for the first time, spray or apply a thin layer of cooking oil onto
the nonstick surfaces of the Plates with a paper towel in order to season the nonstick surface. As
necessary, reapply a thin layer of cooking oil throughout the life of the Plates to maintain best
nonstick performance.
To Assemble
Place the product on a clean, flat, level, stable, heat-resistant surface with at least 4-6 inches of
space on all sides to allow adequate air circulation.
Positioning the Upper Housing:
1. Closed/Heating Position: The Upper Housing is closed and rests on the Base. Use this position
when starting/heating the product and when grilling most foods.
2. Open Position: The Upper Housing is open. Place
the Product in this position when starting to use
the Grill function, and when grilling certain foods
in which the upper Grill Plate is not appropriate,
such as pizza or fish. Lift the Handle until the
Upper Housing is at about a 90°angle.
3. Flat Position: The
Upper Housing is open and level with the Base, creating
two cooking surfaces.
Use the product in this position when grilling
larger amounts of food.
To flatten, pull upon the Hinge Release and push
the Handle down.
Inserting/Changing Plates:
Slide the notches in the rear of the lower Grill Plate into the retaining hooks, then press down
on the front of the plate to snap it into place. Repeat to attach the upper Grill Plate.
Hinge
Release