Shelly MOTION Manual De Instrucciones página 36

Motion pulse count
Allows the sensor to send alerts only if motion is repeated. It is
usually used to avoid false positives. The default value is 1, if you
have false positives you can increase it up to 4.
Motion detection operating mode
Lights control based on certain lighting conditions, The options
are "In any light", only when it is dark, "Dusk" or "Light". If the sen-
sor is not in the specified range of illumination, it will
not detect movement and will not perform any action.
Tamper alarm sensitivity
Shelly Motion has a built-in accelerometer to detect vibration
and temper. If someone is trying to divert or move it from where
you placed it you will be notified. You can adjust sensitivity level
based on your convenience and location. This may be needed if
you use the sensor in a place where there may be vibrations from
vehicles or other causes.
Motion sensor
From here you can enable or disable device motion detection.
When disabled, the sensor will not send information in case of
motion until you Enable it again.
Sleep time
This feature allows you to temporarily disable the sensor to detect
and send movement information for certain period of time. After
the specified time has expired, the sensor will be reactivated. The
sleep time can be terminated manually by enabling it from the
Sensor Motion menu.
Weekly scheduling
Schedule timer
Shelly motion supports modes of operations based on day, time,
sunrise and sunset parameters. To select the operating mode, se-
lect the time or position of the sun and one of the two possible
options: Activate / Deactivate motion detection. This allows you
to define you to be notified in case of unauthorized movement
detection.
36
User and Safety guide