Singing Machine SMM-112 Manual De Instruccion página 3

Instructions for Use
1. Insert one (1) active DC 9-Volt battery into the slot located at the
bottom of the transmitter.
2. Insert one (1) active DC 9-Volt battery into the slot located in the back
of the receiver.
3. Plug the Æ 3.5mm microphone cord into the transmitter input jack.
4. Hold the transmitter on the belt by attached clip.
5. Properly wear the wireless headset microphone and adjust the mic
head by its flexible cord to appropriate position.
6. Set the switch on the transmitter to the STANDBY position.
7. Plug the receiver into the Microphone Input Jack of your Singing
Machine karaoke machine.
8. Set the switch on your Singing Machine karaoke machine to the ON
position.
9. Adjust the Master Volume and Mic Volume Controls of your Singing
Machine to a comfortable level.
10. Set the switch on the receiver to the ON position.
11. Set the switch on the transmitter to the ON position.
Your Singing Machine Wireless Microphone is now ready for use!
Maintenance
! To ensure long battery life, please make sure that both the Receiver and
the Transmitter are set to the OFF position when not in use. To be
absolutely certain, we advise you to remove the 9-Volt batteries from
both the Receiver and the Transmitter when they are not in use.
! Please remove the Receiver from the Microphone Input Jack of your
Singing Machine karaoke machine when not in use. This will reduce the
possibility of damage to the Receiver.
E2