Lea LE51260B Instrucciones Originales página 27

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Push the bag tube (16) onto the exhaust port of the machine and rotate the tube so that the
fixing holes line up.(Fig 3.1)
2. Use the screwdriver (21) to tight the two normal screws to keep the tube in place.(Fig 3.2) Install
the bag on the bag tube.
3. Make sure the vacuum bag is zipped and closed before starting the unit.
4. Adjust the bag shoulder strap so that is comfortable over the operator's shoulder when holding
the blower Vacuum.(Fig 3.3)
Assembling the vacuum tube (Fig.4)
1.
Push the upper vacuum tube (19) and lower vacuum tubes (20) together and rotate until they
lock.(Fig 4.1 & 4.2)
2.
Use two screws(13) and lock the tubes together.(Fig 4.3)
3.
Remove the screw that locks the air intake cover.(Fig 4.4)
4.
Open the air intake cover, Install the vacuum tube into the vacuum housing (Fig 4.5)
Fueling
MOTOR FUEL: mix the petrol and oil at 40:1 only
1. Use fresh unleaded petrol. You must use 100% synthetic oil specifically made for heavily
stressed two stroke engines.
2. Mix the petrol and oil in an approved container. Never mix fuel directly in the fuel tank.
3. Place the unit upright on the ground or on a sturdy bench and wipe any debris from around
the fuel cap.
4. Unscrew the fuel tank cap and pour the mixture into the tank with the aid of a funnel.
5. Be careful not to spill any mixture. If this happens, wipe the spill with a clean rag.
6. Start the engine at least three meters away from the area where the fuel tank has been
filled up in order to avoid any risk of fire.
Danger of fire and burn injuries
Always use extreme care when handling fuel! Fuel is highly flammable.
Never attempt to fuel the engine if the fuel system components are damaged or are
leaking.
Never attempt the refuel the engine while it is running or still warm, allow it to cool
before fueling
Never smoke or light any fires near the unit or fuels.
Always transport and store fuels in an approved container.
Never place flammable material close the engine muffler.
Never operate the unit without a properly functioning muffler and spark screen cap
installed
Never operate the unit unless it is properly assembled and in good working condition.
Do not use petrol which contains ethanol or methanol as it may damage the unit and
other engine parts.
Mix only enough fuel for your immediate needs.
23

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Le51260bv3

Tabla de contenido