Nexxt Solutions X4YHADSW100 Manual Del Usuario página 13

9:41 AM 60 %
By default, the device will be in pairing mode: Click on
Confirm light blinks rapidly, and then press Next to
continue.
Otherwise, you must manually reset the device. Press and
hold the ON/OFF switch for approximately 7 -10 seconds or
until the LED starts blinking rapidly.
Step 3
9:41 AM
RESET PAIR
LED light
60 %
When Device added successfully is displayed, assign a
location and click on Done.
Step 4
9:41 AM 60 %