PickData Bridge NET Manual Del Usuario página 2

ETHERNET COMMUNICATION
The BRIDGE NET device is a serial physical environment to Ethernet communications converter that uses TCP/IP communication
packages. The gateway is responsible for the transparent conversion under TCP or UDP connections. The operation is determined by
the parameterisation carried out in the internal configuration web menu.
The device is equipped with a self-detecting 10BaseT / 100Base TX connection for the physical connection of the BRIDGE NET
converter to an Ethernet network. For its configuration, the device has IPSetup pc software from which the
user can define the network protocol used to communicate with the management software or
communications system master.
CONFIGURATION OF THE DEVICE
To configure Bridge NET you must download the PC software from PickData's website. You will be able to
configure any TCP or UDP parameter, set subnetworks and verify communications.
For advanced configuration download the manual of the product at PickData's website.
INSTALLATION
Bridge NET must be connected to a power circuit with GL fuses in compliance with IEC 269, or M type with values from 0.5 to 1 A.
Bridge NET Must be fitted with a circuit breaker switch or equivalent device. Power supply cabel must have a minimum cross-sectrion
2
of 1 mm .
Bridge NET has been designed for DIN rail mounting.
IMPORTANT
Take into account that when the device is connected, the terminals may be hazardous to the touch, and opening
the covers or removing elements may provide access to parts that are dangerous to the touch. Do not use the
device until it is fully installed
* If the unit is not operated according to the manufacturer's specifications, its guaranteed degree of protection may be compromised.
SAFETY PRECAUTIONS
DANGER
Warns of a risk, which could result in personal injury or material damage caused by an incorrect handling or
installation of the unit. In particular, handling with voltages applied may result in electric shock, which may cause
death or serious injury to personnel. Defective installation or maintenance may also lead to the risk of fi re. Read
the manual carefully prior to connecting the unit. Follow all installation and maintenance instructions throughout
the unit's working life. Pay special attention to the installation standards of the National Electrical Code.
DISCLAIMER
PickData, SL reserves the right to make modifications to the device or the unit specifications set out in this instruction manual without
prior notice.
PickData, SL on its web site, supplies its customers with the latest versions of the device specifications and the most updated manuals.
MAINTENANCE AND TECHNICAL SERVICE
Device doesn't require maintenance.
In the case of any query in relation to unit operation or malfunction, please contact the PickData, SL technical support service.
PickData, SL – Technical support service
Calle Innovació, 3
08232 – Viladecavalls (Barcelona), SPAIN
Tel: (34) 935 117 505 (España)
Email: sat@pickdata.net
V01-310119