AERMEC AER Connect Manual De Instrucciones página 34

2.3 AERCONNECT AND MULTI ETHERNET-RS485
Configuration for this type of connection:
1. Make all the electrical connections correctly (specified in chapter 2.5 p. 9);
2. Configure the parameters relating to the serial port (Modbus address, Baud rate) of the VMF-E6 panel;
3. Activate the recognition and configuration procedure of the Ethernet-RS485 expansion through the MGate-Manager software (3.1 p. 11);
4. Repeat the recognition procedure for all the remaining Ethernet-RS485 devices;
5. Activate the webserver recognition and configuration procedure using the "AerConnect Search for devices" (3.2 p. 17) software;
6. System is ready for use;
Ethernet-RS485 (1)
RS485 (BMS)
Ethernet-RS485 (2)
RS485 (BMS)
Ethernet-RS485 (3)
RS485 (BMS)
RS485 (VMF)
VMF-E6 (1)
RS485 (VMF)
VMF-E6 (2)
RS485 (VMF)
VMF-E6 (6)
7